When working, the small road roller should start first before starting to vibrate. The internal combustion engine should be at medium speed first, and then adjust to high speed; when shifting and reversing, it should be stopped first, and the speed of the internal combustion engine should be reduced when shifting; it is strictly forbidden for the roller to vibrate on a solid ground. ; When rolling the soft roadbed, it should be rolled 1~2 times without vibration, and then vibrated and rolled; during rolling, the vibration frequency should be consistent, and the vibration should be adjusted first for small adjustable road rollers. After working with the frequency, it is not allowed to adjust the vibration frequency without vibration.
The adjustment of the reversing clutch, the shock clutch, and the brake should be carried out after the main clutch is disengaged; when going up and down the slope, fast gears shall not be used, and during sharp turns, including when the articulated road roller is rolling in a small turn circle, It is strictly forbidden to use fast gear; the road roller must not engage vibration when driving at high speed; when stopping, the vibration should be stopped first, then the reversing mechanism should be placed in the middle position, the transmission should be placed in neutral, and then the handbrake lever should be pulled up. Turn off the flame after minutes; other operation requirements should meet the requirements of static pressure small road rollers. When working, the small road roller should start first before starting to vibrate. The internal combustion engine should be at medium speed first, and then adjust to high speed; when shifting and reversing, it should be stopped first, and the speed of the internal combustion engine should be reduced when shifting; it is strictly forbidden for the roller to vibrate on solid ground. ; When rolling the soft roadbed, it should be rolled 1~2 times without vibration, and then vibrated and rolled; during rolling, the vibration frequency should be consistent, and the vibration should be adjusted first for small adjustable road rollers. After working with the frequency, it is not allowed to adjust the vibration frequency without vibration.
The adjustment of the reversing clutch, the shock clutch, and the brake should be carried out after the main clutch is disengaged; when going up and down the slope, fast gears shall not be used, and during sharp turns, including when the articulated road roller is rolling in a small turn circle, It is strictly forbidden to use fast gear; the road roller must not engage vibration when driving at high speed; when stopping, the vibration should be stopped first, then the reversing mechanism should be placed in the middle position, the transmission should be placed in neutral, and then the handbrake lever should be pulled up. Turn off the flame after minutes; other operation requirements should meet the requirements of static pressure small road rollers.